• Pack
Pixhawk 3 PRO ready RTK GNSS Kit (F9P)

Pixhawk 3 PRO ready RTK GNSS Kit (F9P)

Pixhawk 3 PRO ready RTK GPS Kit based on multiband u-blox ZED-F9P module (GPS/GLONASS/BeiDou/Galileo).

0914
€769.90
Tax excluded

This pack contains

Quantity
There are not enough products in stock

A ready to use RTK GPS Kit for the Pixhawk 3 PRO autopilot (base + rover)

The accuracy of RTK positioning will provide you with an incredibly powerful solution to locate your vehicle and plan missions that require centimetric accuracy, and will let you choose what telemetry link to use to have your modules communicating!

This kit, specifically meant for the Pixhawk 3 Pro, includes Sirius RTK GNSS F9P (Rover and Base) that bring next level of scalable GNSS high precision technology.


            Increases high precision performance in difficult environments by leveraging a greater diversity of satellite signals.

            Supports a variety of modern correction service technologies (RTCM v 3.x, SSR, SBAS, PPP).

            Keep providing accurate positioning in environments that are out of reach of GNSS signals (tunnels, parking garages, urban canyons with bridges) with additional inputs from inertial sensors (based on dead reckoning algorithms).

            Integrates advanced jamming and spoofing detection to achieve highest levels of security.

The SIRIUS RTK GNSS BASE (F9P) features u-blox RTK ZED-F9P receiver platform, which provides multiband gnss to high volume industrial applications. This base is made to provide the most reliable base module possible. Featuring an integrated active antenna, it is the best module to provide your system with an accurate and powerful base module.

Sirius Rover F9P GNSS provides 1cm position accuracy, a convergence time under 10 seconds and a navigation update rate up to 20Hz. Coupled with a base module, it will get your system to achieve accurate missions that you will have planned, thus opening multiple possibilities for your operations!

This module features Professional Grade Magnetometer RM3100. A ready-to-use and operational module that eliminates any noise in your magnetic field measurements for accurate heading and orientation calculations.

Powers any vehicle from flying drones to ground vehicles

This package includes

1 x SIRIUS RTK GNSS Base module

1 x Sirius RTK GNSS Rover module

1 x JST-GH 6pins cable

Charger 12V / 1A (PLUG : EU)

Get in touch with our engineering team for online product support. 

GET HELP

0914
Mechanical  

Size   100 x 100 x 40mm
Weight310g
Spacinghole mounting pad
Wires

JST-GH 6 pins

Operating T°-20°C to 60°C

Electrical

Supply Voltage5V
Average Current Consumption50mA
Logical Level Voltage3.3V
Battery capacity3000 mAh

Hardware

Chip  ZED-F9P U-blox
AntennaActive
Battery ChargerYes

Ports

UARTx2
I2C

Data

Input ProtocoleRTCM3 UBX NMEA
Output ProtocoleRTCM3 UBX NMEA
CLogsUSB UART
Receiver type

184-channel u-blox F9 engine

GPS L1C/A L2C, GLO L1OF L2OF,

GAL E1B/C E5b, BDS B1I B2I, QZSS L1C/A L2C

GNSS

SignalGPS / QZSS GLONASS • Galileo •BeiDou
Tracking and nav.-167 dBm
Update Rate5Hz to 14Hz

Positionning

Nav. update rateRTK up to 20 Hz
Position accuracyRTK 0.01 m + 1 ppm CEP
Convergence TimeRTK < 10 sec

 

Access Pixhawk 3 PRO ready RTK GNSS Kit (F9P) user guide on Drotek Documentation

                       

ZED-F9P high precision GNSS module : U-blox Data Sheet   /   Product Summary

Quantity         Discount

55%
2010%
10015%
25020%

Related items

16 other products in the same category: